-
Operating position – vertical (suspended on
-
the wall) Combined storage water heaters
-
designed for suspension on the wall with
-
volumes of 80-200 litres. The manufacturer
-
throughout all the history of the heaters production
-
keeps same pitch of the anchoring bolts in order
-
to assure easy replacement of time-expired water
-
heaters. It is also possible to buy the suspension
-
for the pitch of the anchoring bolts reaching 350
-
mm.
-
Heating options:
-
Electric power. Ceramic heating element controlled
-
by the operating thermostat and secured by the
-
safety thermostat (thermal fuse).The thermal range
-
is 0-80 °C. Connection voltage is 1-PE–N/AC 230 V
-
/50 Hz.
-
The IP 45 electric shielding enables mounting of
-
heaters above baths.
-
Heat exchanger. The heater may be connected to an
-
external hot water source with the max.
-
temperature of 110 °C and pressure of 1 MPa .
-
Heater with the adequate output of the heat
-
exchanger must be linked depending on the output
-
of the source. The heat exchanger works in forced
-
circulation mode and also in self-circulation system.
-
The heating water regulation sensor may be inserted
-
into the common receiver with electric installation
-
sensors.Most common use Preparation of hot utility
-
water for premisses with hot water central heating
-
using gas and solid fuels during a winter season.
-
Electric heating off the heating period is enabled
-
with the possibility to use the low tariff of electric
-
supply (night tariff).
-
Accessories
-
Safety valve
-
Optional equipment
-
Circulation input
-
Two and three-phase connection 400 V/50 Hz
-
The heating element with higher power output,
-
max. 4 kW